Buying a splicer that won’t work with certain types of cables is typically not a good idea. You should also ensure that it is compatible with all major brands. If any splicer you see takes significantly longer, you may wish to rethink the purchase! The longer you have to wait, the more time you waste that could be doing something else! It’s not uncommon to be able to splice cables in 5-10 seconds. If you’re in the market for a fiber splicer, the question is, of course, what should you look for in one? There are three things any fusion splicer you buy should have.įirst, it should have a fast splicing time. Additionally, the machine will give you more options. While both methods work, if you want guaranteed results that are more likely to last, get a fiber splicer. For example, you can “fuse” a “48 fiber” cable to six “8 fiber” cables if you wanted to connect a data center, for example, with six remote offices. The line will essentially be like new again, rather than a spliced cable and assembly patchwork.Īdditionally, fusion splicing can handle multiple cable types. ![]() Since this machine essentially “welds” the cables together, it’s much more permanent. There’s significantly less insertion loss and splicing loss with this method. Another earthquake could knock the splice loose.įusion splicing (which requires a fusion splicer) fuses the cables to act and function as one again. For example, let’s say an earthquake damaged the original line. If something happens to that apparatus, the splice can come undone. It requires an apparatus to hold these cables together. While it might not be huge, if you have multiple splices in any given cable, it could start to degrade the cable’s ability to function.įurthermore, mechanical splicing is not as “secure” as you might want it to be. There’s typically insertion loss and splicing loss involved with this method. The problem is that mechanical splicing is not as robust as fusion splicing. All you need is the cable and something to hold it all together. It doesn’t require very much special equipment to work. Therefore, a fiber splicer (or, you could say, fusion splicer) is a device to “fusion splice” two fiber optic cables together! Why Is a Fusion Splicer the Best Option For Fiber Splicing?Īs you might imagine, mechanical splicing is less costly. This fusion produces a non-reflective, continuous connection that results in a minimal loss. After that, it fuses the glass ends together using an electric arc or heat. It aligns the two fiber ends appropriately. ![]() This method requires a specific fiber splicer machine to do this properly as it is exact. ![]() ![]() After installing, there’s a cover that goes on to fasten the splice permanently. It’s a small section of cable that precisely aligns the bare fibers. This assembly aligns them using an index matching fluid. It joins two or more optical fibers by holding them in place by an assembly. As you might guess, mechanical splicing is primarily manual. This method is arguably the most straightforward as it requires little machinery. The first method is through mechanical splicing. Why the FiberFox Mini 6S+ Is a Great Fusion Splicerīefore getting into what a fiber splicer is, it’s first essential to understand the methods of splicing fiber cables.Why Is a Fusion Splicer the Best Option For Fiber Splicing?.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |